|
|
GT-Command Extra is important for you if you want your friends and family to share your experience and fun with your model train and layouts. You can apply as many extra users as you can connect PC's in your switsch.
This creates real fun when you drive and your friends/family also drive. Allow them to do everthing or allow them to do only a certain part, a certain train etc. - with voice control.
From V2.0 and onward more users can use GT-Command simultaneously on the same layout.
Extra users are connected on extra PCs, which are connected to the host. Every user uses his/hers own PC, because voice control requires CPU power. Every user installs GT-Command or GT-Command Extra on his/her own PC. The PCs are connected via a normal router with internet cable or wireless. See user manual for installation of GT-Command. GT-Command Extra is installed in the same way as GT-Command.
On an extra PC a standard GT-Command can be used or a ”GT-Command Extra”, which only controls trains and track via the connection to the normal GT-Command of a layout (host). GT-Command Extra has its own licence key. It is impossible to connect more PCs with the same licence key.
Setup is done by the PC – the host PC – selection of Multi-user Sessions in the main menu and then Setup multi-user session. A new window opens and tells which IP address the other users should connect to. The other users connect their PCs to the same router as the host PC. Multi-user operation is selected from the GT-Command main menu and then select Join multi-user session. A new window opens, in which the IP address of the host PC is entered. Press Join. On the Host PC it appears that a new user has been connected with a new address.
The Connect window must stay open or be minimized on all PCs during the entire session. Multi-user operation is stopped by just closing GT-Command or by closing the multi-user window.
|
|
|
