Choose language
Picture galleries
Hent Adobe Flash player
Businesspark Struer Facilities
GamesOntrack New Office facilities at Fælledvej 17, 7600 Struer.

Tips & Tricks GT-Command

GT-Command Automation

As more customers have tried the GT-Command many new ideas how to use the features in the products have been provided. Here are just a few:
- Use the standard automation part when you turn on / start your layout. Write a little automation sequence that allows turning on off / turn on all the sounds and lights. set your initial routes and have a safe and pleasant start. Easy to make and a great help.
- And accordingly if you end up having too many sounds and other functions, turn them all off in one sequence. Silence is also nice.
- Loco names can be used from any word. From release 2.0 we will also support combined names with numbers. Please select names which distance themselves somewhat from other by the sound. And use names with some sound volume. Long names are fine.  The same counts for the figures for the switches and signals. Numbers from one to eight are usually easily recognizable while nine often is snapped off.
- You will immediately try to automate and synchronize trains using the automation. With GT-Position you have all blocks available which you can draw. If you have standard feed back modules like S88 you can still apply less than normally if you use the timer in the Automation program.  

Two train shuttle example with standard GT-Command only

See the enclosed PDF with a two train shuttle control example. It can be done a lot more detailed, more virtual blocks can be inserted, more stepwise accelerations, more security control, more sounds, etc.. However, it can also be done quicker or more aggressive - - it is all up to you and your temper.
Attached file:    Shuttle trains (166 Kb)

Stop track with GT-Command IB-COM

Even the simplest thing on an automated layout requires some training.
In the enclosed document we have shown how to voice control and automate a main track with a stop track, a switch, and a feed back module.
If you do not want to automate right away you can wait with the feed back module.

See the enclosed pdf-file
Attached file:    Stoptrack (334 Kb)

Turntable Automation with GT-Command

How to build a turntable control with GT-Command. We want to use voice control or automation for the turntable and we want to automate the driving and set routes where the turntable is part of that.
See the enclosed pdf-file .

If you use GT-Position, then place a sender on the bridge (on the house). Then you can automate your bridge turning to whatever connecting track putting small virtual blocks next to every exit.
Attached file:    Turntable (320 Kb)
Latest news
11.15.2021 1:19:00 PM
GOTposition - New brand for our industrial solutions. --- Enabling...
Automatic learning now
Find the bug
For any model train enthusiasts wiring and cabling under the layout is a major challenge. Countless are the wire bundles, which from time to time have be scrapped when the layout is built on. And countless are the error searches where a problem must be found among a jungle of wires, where the color, the bundling, or the mark up is not up-to-date. But the worst is probably that many enthusiasts and many young people think it is too cumbersome, and therefore throws himself over the alternatives.

Read more
Go on
You have a LEGO(R) Train Testlicense Card.
Download Program
Download the LEGO train layout for your own operation:
Download Layout

See & buy Products:
Product Catalog

Get GT-Command Testlicense:
Test license

Voice Control
In cell phones voice control has been an option for some time, however very few people use it. The problem is that the model assumes you as a user to train the phone and learn the device your way of speaking. And you forget how you trained the phone, thus is does not work after a while again.
Gamesontrack is different. We use already spoken standard libraries created by 1000-4000 people from most parts of the country.
Read more
How to automate
There are many ways to do automisation of a model railway layout. The traditional method deals with doing all the security stuff as a copy of the real railway. That means putting a lot of electronics under the tracks for how to adjust points, turnouts, occupation of blocks etc. Gamesontrack introduces a somewhat different method with focus on easiness and simplicity in order to get as much as possible to operate in a controlled way.
Read more  |   Uhresøvej 35  |   7500  Holstebro  |   +45 3070 3777  |