Choose language
Picture galleries
Hent Adobe Flash player
Demolayout 2-rail
A 2-rail demolayout which support GT-command, and games GD1 and GD2 + more, and facilitates multiple trains and automations. To be folded for transportation. This layout using Lenz, but could be any Uhlenbrock, ESU, Märklin, Roco, TwinCenter etc. Size 196 x 107 cm inclusive borders. Transportation protected after folding. Can be in the back of a normal Stationcar. Notise the 2 wholes in the fold line for wires and PC's and monitors etc.

DCC by radio to N and H0 trains

Now you can save your digital controller and run your N and H0 system with DCC as the control method but only with traditional DC on the track. Both trains and switches can be controlled via the radio and your PC do the work, or if you want so also your smartphone can operate the trains as well as radio based handheld terminals like the Daisy II from Uhlenbrock.

The solution includes our existing GT-Command and GT-Xconnect. The two new components GT-Xcontrol Coil will pull the switches via radio and a new transmitter / decoder GT-Xcontrol N + H0 Lok will operate the trains from sitting inside the loco. . The products will be added to the web shop for ordering early January.

The solution is a direct extension of our successful track G-solution where the train only use rail as the power supply (or uses battery), and DCC pulses are transmitted through our GT-Xconnect radio master.

In the same way now with Track N and H0. Due to space requirements of N and H0 trains we have built a decoder, a radio and a position transmitter togetehr at the 29x11x4 mm which allow 1.2 A for operation of the Loco. And we have developed a turnout decoder in the form that exactly matches Märklin C-rails, however, it can pull all types of coils with dual coils i.e. normal H0 and N-coils.

If you have a DCC-central you can still use for these trains just by connection the track-output to the GT-Xcontrol radiomaster. Then the control will just pass by radio to the trains in stead of by tracks.

In the attached data sheet you can see the provisional specifications, so you can start planning how it could fit on your solution.

Attached file:    GT-Xcontrol Coil and GT-Xcontrl N+H0 Loco (930 Kb)
Latest news
Privacy in short
Our Privacy policy can be seen here. In short:

New catalogue available as download
Our new 2018/19 catalogues is available as pdf download.
Easy and simple
Go on
You have a LEGO(R) Train Testlicense Card.
Download Program
Download the LEGO train layout for your own operation:
Download Layout

See & buy Products:
Product Catalog

Get GT-Command Testlicense:
Test license

Voice Control
In cell phones voice control has been an option for some time, however very few people use it. The problem is that the model assumes you as a user to train the phone and learn the device your way of speaking. And you forget how you trained the phone, thus is does not work after a while again.
Gamesontrack is different. We use already spoken standard libraries created by 1000-4000 people from most parts of the country.
Read more
Find the bug
For any model train enthusiasts wiring and cabling under the layout is a major challenge. Countless are the wire bundles, which from time to time have be scrapped when the layout is built on. And countless are the error searches where a problem must be found among a jungle of wires, where the color, the bundling, or the mark up is not up-to-date. But the worst is probably that many enthusiasts and many young people think it is too cumbersome, and therefore throws himself over the alternatives.

Read more
How to automate
There are many ways to do automisation of a model railway layout. The traditional method deals with doing all the security stuff as a copy of the real railway. That means putting a lot of electronics under the tracks for how to adjust points, turnouts, occupation of blocks etc. Gamesontrack introduces a somewhat different method with focus on easiness and simplicity in order to get as much as possible to operate in a controlled way.
Read more  |   Uhresøvej 35  |   7500  Holstebro  |   +45 3070 3777  |