Choose language
Danish
English
Deutsch
 
Newsletter
Picture galleries
Hent Adobe Flash player
Demolayout 2-rail
A 2-rail demolayout which support GT-command, and games GD1 and GD2 + more, and facilitates multiple trains and automations. To be folded for transportation. This layout using Lenz, but could be any Uhlenbrock, ESU, Märklin, Roco, TwinCenter etc. Size 196 x 107 cm inclusive borders. Transportation protected after folding. Can be in the back of a normal Stationcar. Notise the 2 wholes in the fold line for wires and PC's and monitors etc.

Demolayout 2-rail


Lenz control LZV100, 4 units LB101  1 unit LR101 for blocksections, 2 units LS100 for 6 switches, this example 1 is enough for the games - T21, T22, T23, T24).

 Lenz control LZV100, 4 units LB101  1 unit LR101 for blocksections, 2 units LS100 for 6 switches, this example 1 is enough for the games - T21, T22, T23, T24).

  
T21 to the right as the main switch for station entry. Notise the programming track in the middle T21 to the right as the main switch for station entry. Notise the programming track in the middle
Trafo and LZV100 is disconnected easily under transport and in separate box. Trafo and LZV100 is disconnected easily under transport and in separate box.
To the right stop track B7 with red diesel, main track B3 in the middle, stoptrack B8 with steanengine and B9 empty. In he back T24 as outgoint switch from station. To the very left B6 stop track with a short red/black steam engine. And Main track B5 withe the oil transport. To the right stop track B7 with red diesel, main track B3 in the middle, stoptrack B8 with steanengine and B9 empty. In he back T24 as outgoint switch from station. To the very left B6 stop track with a short red/black steam engine. And Main track B5 withe the oil transport.
Headset is connected to the PC Headset is connected to the PC
The folding line with a hinge under the plate is about 45 cm from the left . Thus the 3 curved tracks from T21 and from T24 in the back) are NOT nailed but dismounted under transport. The plate is folded DOWN, so that tre narrow part with the electronics is up and the broad part with tracks is down and protected by the border. All wires are tabpd under the plate. The folding line with a hinge under the plate is about 45 cm from the left . Thus the 3 curved tracks from T21 and from T24 in the back) are NOT nailed but dismounted under transport. The plate is folded DOWN, so that tre narrow part with the electronics is up and the broad part with tracks is down and protected by the border. All wires are tabpd under the plate.
Latest news
12.18.2016
DCC by radio to N and H0 trains
Now you can save your digital controller and run your N and H0 system with DCC......
9.30.2016
Temperature automatics
GT-Position is very precise, using ultrasound it measures with 10 mm accuracy....
Easy and simple
Go on
You have a LEGO(R) Train Testlicense Card.
Download Program
Download the LEGO train layout for your own operation:
Download Layout

See & buy Products:
Product Catalog

Get GT-Command Testlicense:
Test license


Voice Control
In cell phones voice control has been an option for some time, however very few people use it. The problem is that the model assumes you as a user to train the phone and learn the device your way of speaking. And you forget how you trained the phone, thus is does not work after a while again.
Gamesontrack is different. We use already spoken standard libraries created by 1000-4000 people from most parts of the country.
Read more
Find the bug
For any model train enthusiasts wiring and cabling under the layout is a major challenge. Countless are the wire bundles, which from time to time have be scrapped when the layout is built on. And countless are the error searches where a problem must be found among a jungle of wires, where the color, the bundling, or the mark up is not up-to-date. But the worst is probably that many enthusiasts and many young people think it is too cumbersome, and therefore throws himself over the alternatives.

Read more
How to automate
There are many ways to do automisation of a model railway layout. The traditional method deals with doing all the security stuff as a copy of the real railway. That means putting a lot of electronics under the tracks for how to adjust points, turnouts, occupation of blocks etc. Gamesontrack introduces a somewhat different method with focus on easiness and simplicity in order to get as much as possible to operate in a controlled way.
Read more
GamesOnTrack.co.uk  |   Uhresøvej 35  |   7500  Holstebro  |   +45 3070 3777  |   admin@gamesontrack.com