Choose language
Danish
English
Deutsch
 
Newsletter
Picture galleries
Hent Adobe Flash player
Demolayout 2-rail
A 2-rail demolayout which support GT-command, and games GD1 and GD2 + more, and facilitates multiple trains and automations. To be folded for transportation. This layout using Lenz, but could be any Uhlenbrock, ESU, Märklin, Roco, TwinCenter etc. Size 196 x 107 cm inclusive borders. Transportation protected after folding. Can be in the back of a normal Stationcar. Notise the 2 wholes in the fold line for wires and PC's and monitors etc.

Automation


Create automatic drive - partly or complete

Normally customers want to operate their layout with some degree of automation. Very often the safe drive where trains or cars obeys signals and rules is the most important. On top of that the creation of events and corresponding intersections and waitings and drive also have some priority. Still many customers also want to have some cars or trains in the hand while the safe part is taken care of.

GT-Command has a great variety of automatic options for customers. Especially in combination with the position system you can easily create a lot of automatic support on your layout.
We divide automatic support into three categories:
1) Automatic support without writing any programs, just inserting signals and signs on the drawing of the layout and let the vehicles obey the rules of the signals and signs. You just turn on signals and turnouts and the trains and cars adjust their drive accordingly.
2) Write or copy single automation programs using our well proven automation wizards and scripting.
3) Fully automate hours of drive and events without manual interferance .

Using signals and signs

Please see under "Signals" how to apply signals, signs, and sections in order to regulate the traffic.

Writing single automations

On top of having signals, signs, and sections inserted on the layout you can create certain events. As an example you can create commuting traffic between two destinations. You actually write a small program using our script where you state the commands to the vehicle and to the layout what you want to do in what order.

In the example train L521 goes forward and backward between Station A section B74 on the upper part of the layout and Station B section 400 on the fiddle yard using via T28 turn. The train stops 15 seconds before it returns. The train moves 6 seconds into section B74.
It can be done more elegantly using signals and stop sections etc., but it Works.

Total automation

All Automations can be started and stopped in the automation control form.

There are many macros and automation functions available for customers to apply. Good examples are the block-control program where  Blocks (sections ) actually stop and let trains go depending on if the block ahead (or any combinations of blocks ahead and sidings etc.)  is occupied or not.  

Another example is the automatic selection of free track on a station area. Stop the train at the drive in signal, look around with the position system to find free sections at the station and set the route and drive the train to the first free section, or let it stay until a free section is detected.

Atomations can start and stop other automations, you can issue any command by a script line in the automation program for vehicles, vehicle functions, turnouts, signals, signs, sections, sounds, routes, and more.  

You can let the whole layout wake up and start with one automation setting lights and turnouts in initial positions. Then letting certian trains go and let them tigger other trains. Likewise you can close the layout down and park trains or cars as you like.

The manual has a complete list of automation commands available.
Latest news
12.18.2016
DCC by radio to N and H0 trains
Now you can save your digital controller and run your N and H0 system with DCC......
2.24.2016
Get started withh DCC by radio in large scale trains
With this solution for your large scale trains you benefit in many ways:
- Very...
Easy and simple
Go on
You have a LEGO(R) Train Testlicense Card.
Download Program
Download the LEGO train layout for your own operation:
Download Layout

See & buy Products:
Product Catalog

Get GT-Command Testlicense:
Test license


Voice Control
In cell phones voice control has been an option for some time, however very few people use it. The problem is that the model assumes you as a user to train the phone and learn the device your way of speaking. And you forget how you trained the phone, thus is does not work after a while again.
Gamesontrack is different. We use already spoken standard libraries created by 1000-4000 people from most parts of the country.
Read more
Find the bug
For any model train enthusiasts wiring and cabling under the layout is a major challenge. Countless are the wire bundles, which from time to time have be scrapped when the layout is built on. And countless are the error searches where a problem must be found among a jungle of wires, where the color, the bundling, or the mark up is not up-to-date. But the worst is probably that many enthusiasts and many young people think it is too cumbersome, and therefore throws himself over the alternatives.

Read more
How to automate
There are many ways to do automisation of a model railway layout. The traditional method deals with doing all the security stuff as a copy of the real railway. That means putting a lot of electronics under the tracks for how to adjust points, turnouts, occupation of blocks etc. Gamesontrack introduces a somewhat different method with focus on easiness and simplicity in order to get as much as possible to operate in a controlled way.
Read more
GamesOnTrack.co.uk  |   Uhresøvej 35  |   7500  Holstebro  |   +45 3070 3777  |   admin@gamesontrack.com